Fuan Acepow Equipment Co.,Ltd
Rrespect comes from credibility, Details determine the quality!
Add to Cart
1. Specification of 1.6w ULP Ultra low power foldable portable solar panel
| Model | Monocrystalline silicon ultra low power Solar panel 5w/6v |
| Working Model | 2*6pcs series connectioin |
| Output Power | 5.0 ± 0.2W |
| Working Voltage(with cable Vm) | Vm ≥ 5.75V |
| Working Current(with cable Im) | Im ≥ 830mA |
| Open circuit Vol. | Voc ≥ 6.9V |
| Short circut Current(Isc) | Isc ≥ 890mA |
| Conver efficient | ≥19.8% |
| Module Size | 180*165*2mm |
| Panel with housing Size | 184*168*14mm |
| Gross Weigth | 0.23KG |
| Cable | White, Diameter 22AWG, length:3m , MICRO or Type-C connection at the end, or other customized connector |
| EVA | 0.4mm/0.45mm |
| Frosted PET | 0.2mm |
| Photovoltaic welding zone | 0.08*0.8mm |
| Black adhesive zone | width 4.0mm |
| PCB Module | 1.0mm Fiberglass board |
2.Test environment(STC) of 5w ULP Camera solar panel foldable portable solar panel
1. The Sample is tested by standard PV module tester
2. spectral energy: 1KW/㎡,
3. Air pressure:AM=1.5
4. Temperature: 25℃
3. Advantages of 5w ULP Camera solar panel foldable portable solar panel
(1) IP64
(2) Ultra low power
(3) High conversioin efficiency
4. Power testing of 5w ULP Camera solar panel foldable portable solar panel
1. Turn the light same as customers requirement enviroment.
2. Using electronic load meter to test ULP portable solar panel with cable. When Voltage=5.0V, output≥ 1.6w, then it’s qulified.
3. The light intensity is corrected every 2 hours.
5. Standard methods of testing the electrical performance of 5w ULP Camera solar panel
1. Mainly test the output power.
2, Solar radiation intensity :1000W/ ㎡or as customers’ requirement
3, temperature : 25℃, humidity :10 ~ 90%.
Air Quality: AM1.5
